Produktbeskrivning
The CS-BOY handling crane in column and wall design is available for fast handling of workpieces, tools or small parts. The BOY can be used as a manipulation device with a high rationalisation effect. An electric chain hoist is available as a lifting device. By manually actuating the load, the jib folds so that every point in the working area can be reached easily and precisely and the crane can almost swing around the corner. All cranes are equipped as standard with a manual swivel resistance control. The BOY can also be used as a supply unit for energy and exhaust air systems or as a welding case carrier.
Equipment
• Classification according to EN 13001 HC2 S2 HD2 for easy industrial use
• Lightweight design
• Installation location: Hall
• Foldable jib
• Lacquered in daffodil yellow RAL 1007
• Quality corrosion protection through mechanical steel gravel rusting
• With manual swivel resistance adjustment
• With suspension at the jib tip for hoisting a hoist with hook suspension. Foot hoist attachment on request!
Electricity
• Lockable mains connection switch
• Round cable power supply, laid in the jib profiles up to the jib tip
• Operating voltage 400 V/50 Hz, control voltage 24 V
Electric chain hoist
• Electric chain hoist with hook suspension
• Lifting speed 2-staged
• With the wall manipulating crane, the electric chain hoist is delivered with a standard lifting height of 3 m and a control cable length of 2 m without specification of the lower edge.
• The lifting height and the control cable length of the column manipulating care are adapted to the lower edge, unless a different length is ordered.
Mounting options
• Column manipulating crane: Anchor plate
• Wall manipulating crane: with standard bearing bracket without fixing screws. Other attachments on request (e.g. foundation attachment, wall bracket, support perimeter bracket, etc.).