Product description
• Body of the eye nut Starpoint must rotate freely through 360° after tightening of the screw. Before attaching the sling adjust the eye nut in the direction of pull.
• Ensure plane mounting surface (E). The internal thread has to be 100% engaged in the bolt thread. The threaded stud must guarantee that the plane area of the eye nut rests perfectly flat on the work piece.
• Load capacity indications are only valid with screws of at least grade 10.9.
• Patented
• Can be used up to -40°C (-40°F)
Attention: Please refer to the safe use instructions!