Product description
- Based on the minimum breaking load of the XXIP wire rope, wedge locks achieve 80% efficiency.
- Meets or exceeds all requirements of ASME B30.26, including marking, ductility, safety factor, test load and temperature. In addition, these wedge locks meet other
critical performance requirements not included in the ASME B30.26 standard, such as fatigue strength, notched impact strength and material batch traceability.
- Type approved and certified to ABS 2006 Steel Vessel Rules and ABS Guide for Certification of Cranes.
- Basket is made of cast steel and individually tested with magnetic powder.
- Pin diameter and jaw width allow wedge and lock to be used in conjunction with potting or press-on heads.
- The dead end of the wire rope is secured in the wedge so that the wedge cannot be pushed out or lost.
- No more need for an extra piece of rope, easy installation.
- The TERMINATOR™ wedge prevents the dead end from breaking off due to fatigue.
- The end held off the base of the clamp and the wedge will not deform and can be reused.
- Standard S-421 wedge locks sizes 9-28 mm can be retrofitted with the new TERMINATOR™ wedge.
- Protected by US Patent 5,553,360, Canadian Patent 2,217,004 and their international equivalents.
- Meets the requirements of EN 13411-6: 2003.
- Wedge locks meet the performance requirements of RR-S-550E,
Type C, except for the provisions that must be met by the client.
must be met.
- Wedge locks consist of lock, wedge, bolt and wire rope clamp.