| Working load limit | 1.000,00 kg |
| Max. operating temperature | 70,00 °C |
| Min. operating temperature | -20,00 °C |
| Explosion protection | No |
| Corrosion resistance | Yes |
| Material | Steel |
| Surface | Powder-coated |
| Direction of Load Attachment | Horizontal/Vertical |
| Type of Control | Manual |
| Locking Type | Force Locking |
| Minimum Grab Range | 20,00 mm |
| Maximum Grab Range | 37,00 mm |
| Minimum Load | 10,00 kg |
| Application | Smooth, Polished Surface,Steel Sheet/Steel Construction |
| Standard | DIN EN 13155 |
| Identification label available | No |
| Max. load changes | 16,000 load changes |
| Product description | Lifting Clamp |
| Brand | Crosby |
| Type name | IPNMNJ |
| eClass 6.2 | 36123416 |
| eClass 4.0 | 36122901 |
| eClass 4.1 | 36122901 |
| eClass 5 | 36129090 |
| eClass 7.1 | 36123416 |
| UNSPSC V7 | 24101647 |
| eClass 8.0 | 36123416 |
| UNSPSC V13.5 | 24101647 |
| Defined eStandard | 1 |
| eClass 5.1.1 | 36129090 |
| eClass 5.1 | 36129090 |
| eClass 9.0 | 36123416 |
| eClass 10.0.1 | 36123416 |
| eClass 10.1 | 36123416 |
| UNSPSC V20.0601 | 24101647 |
| eClass 5.1.4 | 36129090 |
| UNSPSC V13.5_S | 241016 |
| A | 20 mm |
| B | 86 mm |
| C | 196 mm |
| D | 265 mm |
| E | 30 mm |
| F | 177 mm |
| G | 80 mm |
| H | 51 mm |
| K | 10 mm |
• Suitable for lifting, turning (180°) and transporting smooth, polished and machined surfaces
• Protection of the load by special rubber lining on the jaws
• High friction coefficient allows lifting of very hard and smooth materials without damaging the surface
• User-friendly operation and easy handling
• The housing of type IPNM 10/P is partially covered with a rubber layer to protect the transported goods from damage
