• For lifting, turning (180°) and transport of steel sheets, steel constructions and standard profiles • This clamp can be used from all angles as it is fitted with a hinged lifting eye which is movable in all directions • Lockable in open and closed position • Permissible minimum load 10% of the lo...
show more
• For lifting, turning (180°) and transport of steel sheets, steel constructions and standard profiles
• This clamp can be used from all angles as it is fitted with a hinged lifting eye which is movable in all directions
• Lockable in open and closed position
• Permissible minimum load 10% of the load capacity/WLL
• For transport goods with surface hardness up to 37 HRC (1,155 N/mm²)
| Working load limit | 500,00 kg |
| Max. operating temperature | 100,00 °C |
| Min. operating temperature | -40,00 °C |
| Explosion protection | No |
| Corrosion resistance | Yes |
| Material | Steel |
| Surface | Powder-coated |
| Direction of Load Attachment | Horizontal/Vertical |
| Type of Control | Manual |
| Locking Type | Micro-Positive Locking |
| Maximum Surface Hardness | 37 HRC |
| Minimum Grab Range | 0 mm |
| Maximum Grab Range | 16,00 mm |
| Minimum Load | 50,00 kg |
| Application | Steel Sheet/Steel Construction |
| Standard | DIN EN 13155 |
| Identification label available | No |
| Max. load changes | 16,000 load changes |
| Product description | Lifting Clamp |
| Brand | Crosby |
| Type designation | IPU10 |
| A | 0 mm |
| B | 44 mm |
| C | 128 mm |
| D | 228 mm |
| E | 40 mm |
| F | 115 mm |
| G | 41 mm |
| H | 28 mm |
| K | 11 mm |
| eClass 6.2 | 36123416 |
| eClass 4.0 | 36122901 |
| eClass 4.1 | 36122901 |
| eClass 5 | 36129090 |
| eClass 7.1 | 36123416 |
| UNSPSC V7 | 24101647 |
| eClass 8.0 | 36123416 |
| UNSPSC V13.5 | 24101647 |
| Defined eStandard | 1 |
| eClass 5.1.1 | 36129090 |
| eClass 5.1 | 36129090 |
| eClass 9.0 | 36123416 |
| eClass 10.0.1 | 36123416 |
| eClass 10.1 | 36123416 |
| UNSPSC V20.0601 | 24101647 |
| eClass 5.1.4 | 36129090 |
| UNSPSC V13.5_S | 241016 |