Produktbeskrivning
Designed for experienced users with difficult
access conditions
• User-friendly:
- Guide slot and markings simplify the insertion of the rope.
- The ergonomically shaped lever allows the rope to be released and the descent to be comfortably controlled.- Two descent modes: on the side panel or in the V-shaped brake groove.
- Two descent modes: on the side panel or in the V-shaped brake groove.
- The AUTO-LOCK system enables the user to position himself at the workplace without having to operate the lever and tie the device: as soon as he releases the lever, the rope is automatically blocked in the device. The automatic return of the lever reduces the risk of snagging.
- Once locked, the rope can be retracted without using the lever, which allows for short ascents on the rope (when used with a FOOTAPE or FOOTCORD step loop and an ASCENSION hand climb clamp).
- The actuation of the clamping cam makes it possible to release the rope or secure it in the front step.
- The movable side part is equipped with a safety clip so that the device can remain attached to the belt when the rope is inserted to facilitate the passage of intermediate safety devices.
- When the rope is removed from the device, the lever automatically moves to the "parking position" to reduce the risk of the belt-mounted descender getting caught
• Stainless steel reinforcement that protects the device from rope friction and increases wear resistance.
• Abseiling of heavy loads up to 200 kg.
EN 341 Type 2 Class A, CE EN 12841 Type C, CE EN 15151-1,
NFPA 1983 Technical Use, EAC
- EN 341 Type 2 Class A when used with a PARALLEL 10.5 mm or AXIS 11 mm rope
- EN 12841 Type C when used with a rope according to EN 1891 A from 10 to 11.5 mm
- EN 15151-1 when used with a rope from 9 to 10.5 mm
- NFPA 1983 Technical Use when used with a 10 to 11.5 mm rope