| Max. operating temperature | 100,00 °C |
| Min. operating temperature | -40,00 °C |
| Explosion protection | No |
| Width | 190,00 mm |
| Product description | Protective sleeve |
| Hight | 50,00 mm |
| Type designation | SF1-170x40/3 |
| Manufacturer part number | SF-1 170X40/3 |
| eClass 6.2 | 36123490 |
| eClass 5 | 21079104 |
| eClass 7.1 | 36123490 |
| UNSPSC V7 | 24101600 |
| eClass 8.0 | 36123490 |
| UNSPSC V13.5 | 24101600 |
| Defined eStandard | 1 |
| eClass 5.1.1 | 21079104 |
| eClass 5.1 | 21079104 |
| eClass 9.0 | 36123490 |
| eClass 10.0.1 | 36123490 |
| eClass 10.1 | 36123490 |
| UNSPSC V20.0601 | 24101600 |
| eClass 5.1.4 | 21079104 |
| UNSPSC V13.5_S | 241016 |
One-sided coated protective hose type SF-1
The secutex protective hose type SF-1 is technically optimally matched to the SpanSet lifting belt range or the SpanSet round slings. The stop side is secutex-coated, extremely cut-resistant and reduces the formation of wrinkles in the textile. Simply pushed over the sling, the secutex protective hose type SF-1, coated on one side, protects the sling and the load equally on "sharp edges" and rough surfaces.
