• Plug-in connection for power supply and pendant control • Contactor control 48 V • Phase monitoring relay • Thermo sensor in the hoist motor • Operting hours counter • Overload protection by slipping clutch and current cut-off (AK 4 – 8) • Overload protection by current cut-off (AT 9 – 10) • Gear...
show more
• Plug-in connection for power supply and pendant control
• Contactor control 48 V
• Phase monitoring relay
• Thermo sensor in the hoist motor
• Operting hours counter
• Overload protection by slipping clutch and current cut-off (AK 4 – 8)
• Overload protection by current cut-off (AT 9 – 10)
• Gear limit switch for end position actuation
• IP 55 enclosure, IP 66 as option (protection against particles and water)
| Working load limit | 10.000,00 kg |
| Max. operating temperature | 40,00 °C |
| Min. operating temperature | -20,00 °C |
| Explosion protection | No |
| Operating voltage | 400,00 V |
| Motor power | 12,00 KW |
| IP rating | IP55 |
| Suspension | Suspension eye |
| Number of chain falls | 2 |
| Effective Working Length (ewl) | 5 m |
| WLL under angle 0° - 45° | 10.000,00 kg |
| Type of Drive | Electric |
| Load chain diameter | 23,50 mm |
| Product description | Traversing device |
| Type designation | 67/19 AT |
| Manufacturer part number | AT 10 |
| A1 | 700 mm |
| A2 | 350 mm |
| A3 | 350 mm |
| A4 | 214 mm |
| A5 | 700 mm |
| B1 | 1176 mm |
| B2 | 424 mm |
| B3 | 752 mm |
| C1 | 140 mm |
| C2 | 185 mm |
| C3 | 36 mm |
| H | 1569 mm |
| M | 40 mm |
| M1 | 63 mm |
| M2 | 58 mm |
| M3 | 53 mm |
| eClass 6.2 | 36123490 |
| eClass 7.1 | 36123490 |
| eClass 8.0 | 36123490 |
| UNSPSC V13.5 | 24101600 |
| eClass 5.1.1 | 36123490 |
| eClass 5.1 | 36123490 |
| eClass 9.0 | 36123490 |
| eClass 10.0.1 | 36123490 |
| eClass 10.1 | 36123490 |
| UNSPSC V20.0601 | 24101600 |
| eClass 5.1.4 | 36123490 |
| UNSPSC V13.5_S | 241016 |